7 Simple Secrets To Totally Rocking Your Ghost Immobiliser 2

Elenco segnalazioni e proposteCategoria: Lavori Pubblici e Trasporti7 Simple Secrets To Totally Rocking Your Ghost Immobiliser 2
Genia McCafferty ha scritto 1 mese fa

Ghost Immobiliser 2

Guards your vehicle against key cloning & stopping thieves driving your vehicle with your original keys. Our most recent immobiliser connects to your vehicle’s data network via CAN and a unique PIN code must be entered for the engine to start.

In contrast to trackers, Ghost doesn’t transmit any radio frequency signals and can’t be detected by diagnostic tools. Also, it doesn’t have any indicators in the form of LEDs or buttons that give the impression of its presence in your car or van.

Anti-key cloning

The Ghost immobiliser was developed to prevent key cloning. This device connects to the CAN data network of your vehicle and generates an unique pin code push sequence using the factory buttons on your dashboard as well as the steering wheel. This will stop the thief from being able to start your car. If the wrong PIN code is entered, the engine isn’t able to start and it will be impossible for them to drive away with your joy and pride.

A ghost immobiliser is a new technology that is extremely hard for thieves to beat. Unlike physical deterrents like wheel locks and steering locks that can be cut off or stolen The ghost immobiliser is a discrete electronic device that cannot be detected by common thieves since it doesn’t emit any radio signals and operates in a silent manner.

The next generation of immobilisers are capable of protecting your vehicle from a variety of threats like key-hacking, cloned keys and relay attacks. It also stops thieves from stealing keys or replacing your ECU because it won’t permit them to start the vehicle without entering the correct PIN code.

In contrast to other immobilisers the ghost immobiliser 2 doesn’t require any additional remote or key fobs in order to operate. It can be deactivated by using an app on the driver’s smartphone. This is a great option when you have to hand your car away for valet parking, or maintenance without key fobs.

The Autowatch Ghost-II is the latest version of our revolutionary ghost immobiliser. It was designed to be simple and easy to use while remaining as secure as possible. This is achieved by integrating the Ghost-II with the vehicle’s CAN data network, meaning there are no wires that can be hidden or easily found. It also comes with a built-in feature that allows you to disarm your Ghost-II by simply connecting to the vehicle’s Bluetooth which means you can get in and drive, without any hassle.

OBD port hacking

OBD port hacking is the newest method being used by professional car thieves to steal cars. Thieves have access to your vehicle’s OBD port with nothing more than an laptop, an app and a few cables which can be bought online for under PS50. Once they have access to your vehicle’s OBD port, they can do whatever they want from resetting fault codes and tuning your vehicle to stealing your pride and joy in just a few seconds.

If you have an Ghost immobiliser fitted it can stop your car being stolen with this method by needing an unique PIN code sequence is entered alongside your key fob to start the engine and then drive away. It communicates with the vehicle’s ECU (Engine Control Unit) via the CAN Data Circuit. This is completely undetectable by any scanners for RF or code grabbing. It also has a Service/Valet Mode that allows your vehicle to start without the PIN code.

To make use of an OBD hacking device you need to have a laptop with software capable of interpreting the OBD protocol, which can be purchased for under PS100 on ebay or Amazon. You’ll also require a cable that has OBD pins that are connected to the CAN Bus. These cables can be purchased on Amazon/Ebay around PS50. The cable needs to be connected to the wiring harness of your car, like the radio wiring harness.

Once the hacker gains access to the OBD port on your vehicle, they can send diagnostics to the system at a high baud rate which can cause a crash to the car’s CAN and stop the systems from working. This could cause the engine to stall and doors to lock, or even the brakes to be engaged.

No additional key fobs or remotes required

The car immobiliser is a fantastic piece of anti-theft technology that is utilized by millions of modern cars all over the world. Utilizing engine ECU software to stop cars from starting if a false transponder signal is sent to it, an aftermarket immobiliser is a great way to protect your vehicle.

It is possible for a thief to know the code to deactivate an immobiliser, ghost Immobiliser 2 to disable it. The batteries in the majority of key fobs can be removed by removing it which means that a burglar could make use of a simple tool to remove the immobiliser’s inner circuit board and replace it with a blank. They will then be able start your car.

With the TASSA approved Ghost 2 immobiliser, there are no remotes or keys to be purchased. The immobiliser communicates directly with the vehicle’s ECU (Engine Control Unit). This is done through a discrete, silent data loop in CAN that cannot be detected by diagnostic tools such as those used by high-tech thieves. It doesn’t come with a traditional keyfob that has an LED indicators, so it’s inaccessible.

There will be times when you need to deactivate Autowatch Ghost 2’s automatic protection for instance, during an valet parking or Ghost Immobiliser 2 a service work. The ghost CAN immobiliser has a dedicated mode for this, referred to as “Service Mode that can be activated with the touch of an app on your phone. The car can still be operated however the maximum speed is restricted to 36mph.

If you’d like to learn more about the TASSA accredited ghost immobiliser, call us today to arrange a demonstration at our workshop. A member of our team will explain how the system works and provide you with your Ghost 2 emergency card, installation certificate, and security guarantee.

Simple PIN code Change Process

Ghost is a next generation device that can secure your vehicle without cutting wires or adding aftermarket key fobs. It is directly connected to the vehicle’s CAN data network. A personalised PIN is created using buttons on the steering wheel and dash. The device does not emit RF signals, therefore it cannot be bypassed. This makes it unrecognisable by sophisticated scanning or code grabbing technologies that modern thieves use.

The PIN code is able to be changed to lock out previous drivers or even include an override number if you forget the sequence. When installing the installer will show how to do this. The system also includes the valet mode feature that can be used to temporarily disable the pin input sequence to allow your mechanic or garage can service the car without needing to know the code. This is a great choice for those who don’t want their pin number to be disclosed, but want to leave their car with valet parking or service.

Contrary to Thatcham products that require additional key-fobs to operate, Ghost is a discreet system that makes use of the buttons inside your vehicle to create a unique interchangeable PIN code sequence. This sequence is entered through the smartphone application. No additional LED indicators are used, and your vehicle will be protected without any risk of being disabled.

Tested for each vehicle

In contrast to key fobs that require you to press buttons on them, a ghost immobiliser fitting immobiliser is discretely placed under your steering wheel or dash to make sure you are unaware it’s there. The device is connected to the car’s CAN data networks and an individual PIN code is programmed into it using buttons that are already present on your vehicle. The system stops your engine from running until the code is entered first. This means that thieves cannot clone the keys of your car or use the OBD to hack into it.

Ghost can be installed in all vehicles including electric vehicles, motorhomes, vans and bikes. It’s also extremely flexible and can be programmed to turn off in a variety of situations. For example, it can be programmed to enter Valet mode when the vehicle is being transported to a valet parking or service company. This permits you to drive within a 30mph speed limit, and the ghost immobiliser will activate itself when the vehicle returns to your possession.

The device can also be reset at any time using your personal PIN code. This is beneficial in the event that you forget your code or the device is inoperable which means it’s just as good as new.

The device is unnoticed by anyone who doesn’t know what it is. It does this by running through the buttons on your steering wheel and dashboard, and using the data they transmit to determine the exact button that was pressed. This makes it a completely secure and reliable security system that can’t be tampered with by jamming, RF scanning, or door lock pick sets.