Wyatt Longwell ha scritto 3 mesi fa
UPVC Window Handle replacement sash windows
Replacing a damaged or broken window handle is a relatively easy task and with the right tools it can be accomplished quite quickly. It is important to identify the kind of handle you have and the spindle’s size before you purchase an alternative.
Older uPVC window handles have a spur which extends and is locked over a wedge striker. They can be left or right-handed and must be to match when replacing.
What type of lock and handle do I need?
There are many different types of window handles made from upvc and locks, each having their own benefits and purposes. The type of handle you have will determine the ease to open your windows and whether or not the locking mechanism functions according to the plan. As time passes and with regular use, upvc window handles may become damaged or worn out, making them less secure and efficient. In certain instances, they might even fall completely off. It is important to repair your window handles made of upvc as soon as you see them falling off. This will prevent potential break-ins and keep your home safe.
It’s an easy task that almost anyone can do. With just a few tools and the right knowledge it’s a straightforward procedure that shouldn’t take less than a few minutes. To begin, you will need to determine the type of lock and handle you have on your window, which will help you identify the best replacement windows near me.
Inline Espagnolette Handles
These are the most commonly used type of upvc handles and are typically located on the other side of your window. They are flat and have an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles also come with a spindle that goes through the center of the handle and into the frame of the window to activate the latch.
Cockspur Handles
These handles are typically found on older uPVC double glazed windows replacement and have distinct hook-shaped designs. Cockspur handles are attached to the frame of the window with one screw, and are less secure than other varieties of window handle.
Handles that can tilt and turn
The tilt and turn handles are different from other upvc handles because they can be turned to open the window and then lowered to the window to let air circulate. They feature a 7mm spindle at the back and are available both in right and left-handed versions.
It is important to measure the spindle size when buying replacement handles made of upvc. Not all are the exact same size. Drop something in the middle of the hole to test the length. This is the maximum spindle length that will fit in your window.
What is a spindle?
uPVC window handles work similarly as doors, with the user turning the handle to activate an internal latch within the frame. This opens the window so that it can be opened and closed. These handles can be damaged, especially if frequently used or subjected to harsh conditions. This can leave you needing to replace your uPVC handles on windows since they may not be able to operate the window properly in the future.
There are a variety of uPVC handles available including Espag, Cockspur and Spaded handle options. These handles are designed to fit in the uPVC frames in various ways. Each handle uses a specific spindle to lock the mechanism fitted to the window. This is why it is crucial to know what kind of handle is installed on your uPVC window to find the right replacement.
The base section of the handle will inform the type of uPVC it is. There should be a’snap in cover’ over one screw that holds the handle base in the correct position. Remove this and then you should be able see the second screw on the opposite side of the base of the handle. After both screws have been removed, you should be able to pull the handle away from the uPVC window.
After removing the uPVC handle, carefully unscrew it from the locking mechanism. Be sure to note the length of the spindle, as you’ll need to ensure that you buy an alternative that is the same length as the original handle and locking mechanism.
The spindle wears out and becomes inoperable with the locking mechanism. This can be caused by corrosion, damage caused by constant use or a loosening locking mechanism. If this happens, it will be necessary to replace the window handle and locking mechanism to restore full functionality to your uPVC windows.
How do I take off the old handle?
In the course of time and daily usage, window handles could become damaged or broken and when this happens, it is crucial to repair them as soon as you can to ensure the security of your home. It is good to know that replacing a worn or damaged handle is a fairly easy task that can be completed in less than a minute and doesn’t require any specialized tools.
To remove the handle, first remove the screw that is located at the bottom of the handle. After this screw is removed, the handle can then be removed from the base section. A second screw is located at the base of the handle. This too can be removed. When both screws are removed the handle can be completely detached from the base section of the window.
After removing the old handle and fixing holes, align the holes of the new handle with the holes that are already in the window frame. There might be a small cap or sticker on the new handle, so take off these if necessary and then put the handle in its place. Once the handle is in place, it is essential to check that it works by turning the handle and ensuring that the lock mechanism is activated.
Espag handles feature a spindle which protrudes out of the handle and slots into the multipoint locking mechanism on the window frame. Cadenza windows feature a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and are hung over the frame that surrounds the window or the transom crossmember of the bar.
After you have installed the new handle, slide the spindle into the window lock and tighten it. Replace the snap-in cover and screw cap (if applicable) once the handle is fixed. The handle is now ready for use to use, so try opening and closing the window a few times to ensure that it is working well and securely.
How do I fit the new handle?
It’s not difficult to change the handle on your Upvc windows. The process is very easy. All you require is a screwdriver and a small amount of patience. First, make sure that the handle is not locked. Then, remove any screws that are visible. You can also replace them with screw caps. After removing the handle, you will need to note the length of spindle that extends from the back. This is crucial because it will determine the kind of handle you will need to buy.
Espagnolette handles are the most popular type of handle for uPVC windows. The spindle is inserted into the handle to control the locking mechanism inside the window frame. When the handle is turned it opens the latch on the window and allows it to open. Over time and through regular use, espagnolette handles may be damaged or destroyed which is why it is essential to locate an alternative.
Cadenza handles are another type of uPVC window handle, which is typically used on tilt and turn windows. They have a protruding knife that operates a multiple-point locking mechanism within the window. They are usually more secure than espagnolette handles since they can only be opened from the inside. They can be replaced using the same method that you would do for handles made of espagnolette however, make sure that the new handle is angled, Replacement Sash Windows not flat.
Once you have selected the correct handle, you can align the new handle to existing screw holes before screwing it into place. Then, put the screws on and test the new handle. This is accomplished by shifting the handle from the locked to the unlocked position and the reverse direction several times. It might be worthwhile to speak with an expert to determine if you can resolve any problems. They are often able to advise you on the best way to resolve the issue in a fast and efficient manner.