Gus Wilkes ha scritto 4 mesi fa
Window Repairs
Window repairs can help homeowners save money and help keep their homes warm. In the event of major damage, such as broken glass or a cracked frame, a window replacement could be required.
However, many other issues can be repaired to extend the life of your windows. Some common problems include:
Cracked or broken panes
Cracked window glass can be caused by a lawnmowers that throws errant rocks or by the blow of a tree branch by strong winds. It’s not just visually awful, but it could also lead to higher energy bills as the broken pieces allow cold air into your home. Luckily, it’s usually relatively easy to fix windows with damaged panes.
Start by carefully removing the glass using gloves and glasses. You may have use a utility knife to break loose the old glazing compound or putty around the frame’s edges. Then, use a gentle paper towel or cloth to clean the surface of the glass and the frame’s wood.
After the area is cleaned, apply a waterproof silicone caulking on the frame’s perimeter. This will prevent water from getting into the frame through the cracks and result in further damage.
If you have double-pane glass cracks that are not treated properly could weaken the gas layer that lies between the panes and make your windows less insulative. If the crack is serious enough to compromise the integrity of the glass or if you have an inner pane that’s totally missing, it might be time to call in a professional.
Cracks in thermal stress can occur when there’s a significant difference in temperatures between the inside and outside of your home, which causes the glass to expand or contract. If this happens on two parts of a window it’s best to replace the glass rather than trying to upvc repair it.
Clear tape can be used to close cracks in windows that are not yet ready to be replaced. It can also keep out bugs and cold wind. You can also cut an amount of nylon stocking big enough to completely cover the crack, and then attach it using duct tape. It’s not a permanent solution, but it’s a good way to keep insects out and cold air away from your home. If your windows are old and you’re beginning to see cracks in the glass, it’s recommended to consult with your local window manufacturer to determine if replacing the entire window could be the best option for you.
Rotten Wood
Wood rot is a common problem for windows. It can ruin a house’s appearance and create a safety risk. It is possible to repair the wood that has rotted. The first step is to ensure that the root of the rot has been taken care of. Examine for leaks in the roof and other places where water can enter the wood.
You’ll then have to take out the rotten components of the window frame. This can be done using a claw hammer, chisel or a rasp. After the rotten areas have been removed it is time to replace them with new wood. Pre-treated wood is suggested for this project since it will resist rot. If you cannot replace the timber that has rotted, you can use wood hardener and filler to strengthen the damaged area. This type of product will be available at a majority of hardware stores. Follow the directions on the label of the product to achieve the most effective results.
After you have repaired the damaged areas of the window sill, it is essential to safeguard the area. You can do this by applying an water-resistant wood sealant. Sikkens, for example, is a great product to apply.
It is also possible to use an epoxy filler with two parts to shield the wood from further damage. This product is easy to apply and leaves a nice finish. However, it is important that you adhere to the instructions for application on the label. When the epoxy filler is dry, you can sand down the wood’s surface. It is recommended to begin with a rough layer of sandpaper and then move to a smoother grade.
You do not want to expose the damaged part to further moisture. It is recommended, that’s why you should cover the repaired surface with an oil-based primer that will protect it from water. Then, you can reapply waterproof wood sealant.
The W won’t let you open
The reason a window won’t open can be caused by various reasons. The house may have settled, or the wood frames might have warped due to rainy weather. There is also the possibility that someone put them in place to protect themselves. But with some patience and the right tools, all windows that are locked can be opened.
One of the most common causes of windows that isn’t opening is the accumulation of gunk or debris on its moving parts. Acme Glass notes that dirt and grime builds up over time on hinges, sliding tracks, and locks. Metal hardware can also rust if it comes in contact with humidity and direct sunlight. Spraying grease on these areas can aid in preventing oxidation and help keep your windows operating properly.
The pulleys that raise or lower the window can become loose, or break. These parts can be weakened and local obstructed if they are located two or more floors above the ground.
If you are having trouble opening windows, try using a pry bar to gently force the window open a little at each time. Place a block of wood on the frame to give the pry bar more leverage. Also, be sure not to harm the window or the wood. You can also try running a hair dryer across the edges of the frame for several minutes to warm the wood and help it to move more easily.
Another common problem with windows that won’t open is a broken spring that prevents the window jamb from rising or lowering. Depending on the manufacturer of your windows, you will have to consult the manual of your owner for additional instructions.
If you’ve tried cleaning and lubricating the moving parts on your windows, but they cannot open, it may be time to replace them. Homespire Windows & Doors offers energy-efficient replacement windows. Don’t let the windows in your home go from functional to inoperable. If your windows aren’t properly shut can expose your home to burglary and water damages. Contact us for more information on our replacement windows and services today!