Giselle Bostock ha scritto 4 mesi fa
How to Replace a UPVC Window Handle
If your window handle made of upvc is damaged, don’t be concerned. Replacing a window handle made of upvc is a fairly simple job and can be accomplished in just a few steps.
If you are using a cranked or an in-line espagnolette type of window handle, they all feature a square spindle that protrudes from the back plate and is inserted into the locking mechanism.
Determine the type and size of the handle and lock.
Over time, window handles and locks can be damaged or lose their function. The good thing is that this can often be fixed without having to replace the entire uPVC window unit. One of the first things you need to do is determine the type of handle and lock you have because this will help determine the parts will be required for replacement.
Identifying the type of handle can be identified by looking at the base of the handle. There is an anchoring screw or pin that holds the handle to its base. If the screw is missing, this can be a sign that the handle has broken off from its base section. If the handle has split internally and is no longer able to grip the spindle, it could be a sign that it is in need of replacing.
There are a variety of uPVC handles, but the Espag handle is the most well-known. They are usually fixed using two bolts, and come with an articulating spindle that is connected to the lock mechanism within the frame of the window. These handles are usually used on tilt and turn uPVC windows.
Another type of uPVC window handle is the Cockspur handle. These are similar to the Espag handle, however they are a little further from the frame. These handles are generally used on older uPVC window frames.
There are also Venetian window handles, which are similar to the Espag handle but they have flat bases that allow them to be placed to the frame. These handles are a good option for homeowners who want an elegant handle that will be a perfect match with their uPVC frames. They are available in a variety of colours that can be matched to any decor.
Take a measurement of the spindle
It is crucial to be aware of how the handle is installed before you can order the replacement. This will determine whether it’s tight enough or too loose and also if it can fit into the window frame. This can be done by identifying the handle type and determining the spindle’s measurement. The spindle is a steel shaft that connects your handle to the lock in the window frame. It’s available in a variety of sizes with the current industry standard being 8mm. Older handles may have a cross-section of 9mm, so it’s crucial to measure the old one to make sure you get the proper size replacement.
There are a variety of window handles, but the most popular are inline Espagnolette and Cockspur handles. These handles operate a locking mechanism in the window. They employ shootbolt rods to secure the window after it has been shut. Depending on the type of handle they are held in place using pins or screws.
You can find replacement handles for windows replacement made of upvc online and in a lot of DIY stores. They are available in various finishes and are suitable for new or replacement windows. For added security they can be key-locking or a non-locking fire escape.
To remove the old handle, simply open the window towards the door and then remove all screws that hold it in place. Store the screws in a container to protect them from damage. Once the screws have been removed, carefully pull out the handle and take a measurement from the base to the top of the spindle. This will provide you with the necessary information to purchase the correct replacement. The handle’s spindle is the metal shaft that connects it to the lock gearbox in the window frame.
Take off the handle from the old one.
Switching the handle of a uPVC handle is a simple job that takes less than five minutes, if you have the proper tools. The first step is to identify the lock type and handle that will help you find the correct replacement. After that, replacement windows measuring the spindle will make sure that the new handle is a good to the existing one. In the end, you’ll need remove the old handle and replace it with the new one.
Most uPVC handles have inline Espagnolette handles. These handles have an internal spindle that slots into the locking mechanism on the window. They are generally easy to remove but may require force if they become stuck. There are typically two screws that keep the handle in place, which can be removed using a screwdriver or pliers. There may be a need to remove pins, depending on the kind of handle.
After you have removed the screws, you can remove the old handle. When the handle is open and the top of the baseplate should be visible. This will reveal two screws that can be unscrewed. There’s also small silver or another colour sticker that needs to be removed if it’s in place.
With the screws that came off the handle, you can put the new handle in place. Make sure the handle is in an open or locked position, and then align the screw holes with the ones on the window. After you’ve done this you can replace the caps on the screws. Test the new handle. It’s simple to swap the uPVC, however you have to make it right.
Fit the new handle
It’s time to install your new handle if it has been successfully removed the old one from the frame. Begin by locating the screw covers and then lifting them out using a screwdriver. After they’ve been removed, put them in a safe place and proceed to the next step.
Then, insert the new spindle into the handle by aligning it with the existing hole and screwing it in. Make sure that you align the holes in the handle with those in the window frame. You should use a screw that is similar in length to those used previously, or it could result in the handle not being secure.
The Espag handle made of uPVC is equipped with a spindle that is 7mm square that rotates the lock mechanism of the window. This type of handle is utilized in the majority of modern uPVC Windows. uPVC Cockspur (also called by the name Cotswold) handles feature an extended, curving nose that locks onto the frame’s outer or cross member of the transom bar. They are usually found on older uPVC Windows.
After the new handle is in place, it’s important to test that it works correctly by locking and unlocking the window several times. If everything goes to plan, your replacement uPVC window handle should now be properly attached and running smoothly. If not, the above steps will allow you to identify any issues and get it fixed quickly. If you are struggling with your uPVC handle or are experiencing other problems with your glazed home improvement, don’t hesitate to contact us at Bridgewater Glass for professional assistance. Our glaziers have been trained to repair or replace windows with a variety of handles and frames, making us an excellent choice for your double glazing replacement window-glazing requirements.
Test the new handle
As time passes and through regular use over time, uPVC locks and handles can suffer from damage and wear and tear. This can make them less secure and efficient, so it is important to replace them immediately. It’s also a good idea to do this when you upgrade your windows, since changing the handle and lock will maintain the integrity of the windows you have just bought.
When it is to uPVC window handles, there are a number of different styles. Some are secured with screws or pins, while others have blades that slide into the lock mechanism. Each type has its own method of replacement, and it’s crucial to know what kind you have before working on it.
The most well-known kind of window handle is the espag. They’re typically used on newer uPVC Windows. These handles come with a spindle that extends from the handle and into the gearbox for locking and, when you open the window it triggers the locking mechanism. They are also simple to take off. However, you must be cautious not to damage either the mechanism or handle.
Cockspur handles are another alternative to uPVC window handles. The locking mechanism is activated when the window is closed or tilted. A spur attaches to the striker plates in the shape of wedges on the frame. This kind of handle can be more difficult to fix than other handles, but it’s still a good option for most homes.
Venetian window handles are secured by two bolts and feature an elongated projection from the frame, which is not the case with the Espag handle. They’re great if you want an elegant flush handle that blends in with your uPVC windows. They are ideal for residential and commercial properties.